The same is the case with the Winix Air Purifier Red Light. Red blinks if your unit is dirty and requires maintenance. Red light may appear due to several other reasons, which will discuss in detail below.

Winix Air Purifier

Winix Air Purifier Red Light - Things You Need To Know

In this article, we will tell you how to fix the red light issue in your Winix air purifier. We must say that you should take the red light signal seriously notes to keep checking and troubleshooting the issue on time.

Indoor Humidity In Winter Vs. Summer - The Ideal State
Maintaining a perfect humidity level around your living space is mandatory for a wonderful and healthy lifestyle. It is evident that the humidity level changes with the change in temperature during summers and winters.

After identifying the issue, we will recommend that you resolve it as soon as possible. Doing so will give your machine a healthy life, ultimately giving you more purified air to breathe and blessing you with a healthy life.

red light signal

Red Light Reset Process In Winix Air Purifier

The process of resetting the red light on the unit depends on which model you are using, as each air purifier has different features and designs. The red light resetting process in the Winix Air Purifier is very similar to most air purifier units. The most common question among Winx air purifier users is how to fix the red light problem.

If your Winx Air Purifier shows a flashing red light, it means there is a problem with the filters, and necessary maintenance is required. You can't solve the red light problem with your air purifier unit by simply turning it off with the push of a button like you normally do in your Home. To solve this problem, you need to clean or replace the filter with a new filter because the old filter is very dirty and full of dust. Let's talk about how you can properly fix the red light problem in your winix air purifier.

Steps To Fix The Red Light Issue In Your Winix Air Purifier

Here are some steps to follow if you want to solve the red light problem with the winix air purifier. In most cases, your air purifier unit will show a flashing red light because the filter is having problems with dust and is dirty or clogged. Because a dirty filter blocks the airflow from the unit, the unit will shut down automatically, and the red light will indicate that something has gone wrong with the unit. So follow these steps to fix this issue properly.

You can also visit our guide: Temperature And Humidity Relationship Chart - All About It


Set The Filter Correctly

To fix the red light problem in your Winx Air Purifier, you first need to set the filter in the unit properly. Improper filter placement Turn the unit off suddenly, and the red light will turn on.


The Filter Needs To Be Cleaned Or Replaced

As we mentioned above, in most cases, air purifier units flashing red lights are due to clogged or dirty filters. So if you want to fix this problem permanently, you need to clean or replace the unit as per the manufacturer's recommended times. So clean or replace the unit according to the current condition of the filter.3.

Deal With Red Light Reset Button

When you clean or replace the filter according to the current condition of the fitter, the next step is to deal with the red light reset button. Hold the reset button for at least 5 seconds until the unit beeps.


Notice The Red Light

Consider the red light; when the light changes from red to blue, it means that the red light problem has been successfully solved.

The Red Light Signals For Pollutants

If your Winix air purifier shows a blinking red light, it means that the unit's sensor is detecting too many airborne pollutants, which means that your indoor air quality is very poor, and You need to worry about it. To prevent this, you must run the unit at maximum speed to clean the air as quickly as possible. To finish, the air quality goes from very poor to good; the indicator color changes from red to blue.

Frequently Asked Questions

Why did the light on my air purifier turn red?

Your air purifier unit is showing a red light because dirty air filters are completely covered with contaminants and need to be cleaned or replaced immediately. Another reason your unit is showing a red light is that the air quality inside your home is very poor, and your air purifier can no longer clean the air.

How do I reset the Winix red light?

You can easily reset your Winix air purifier red light Through these steps:

  • Turn on the unit.
  • Press the filter reset button and hold it for at least 5 seconds until the unit beeps.
  • After the beep, the filter replacement indicator will disappear.
  • Now your True HEPA filter is reset.

What do the colors on the Winix air purifier mean?

The LED light of Winix air purifiers indicates the quality of your indoor air:

  • Blue means excellent.
  • AMBER indicates the normal level.
  • RED shows the quality level of air is too bad.

The level of air quality displayed on the unit by the LED light indicator depends on the number of particles detected by the sensor.

Final Words

To summarize the entire discussion, we can conclude that the blinking red light on your Winix air purifier unit indicates poor indoor air quality. When the unit's sensor detects high concentrations of airborne pollutants, a red light appears on the unit.

To reset the red light on your Winix air purifier, you must turn on the unit and press and hold the filter reset button for at least 5 seconds until the unit beeps. Don't start. After the beep, the red light turns blue, and the reset process is successful.


Share this post